D.P. Engineer

GEMTECH I DIFFERENTIAL PRESSURE GAUGE FOR SACHIN Industrial Estate SURAT Gujarat

GEMTECH I DIFFERENTIAL PRESSURE GAUGE FOR SACHIN Industrial Estate SURAT Gujarat

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH / Differential Pressure Gauge Near Dalia Industrial Area Mumbai Maharashtra India

GEMTECH / Differential Pressure Gauge Near Dalia Industrial Area Mumbai Maharashtra India

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH I DIFFERENTIAL PRESSURE GAUGE IN Universal Industrial Estate MUMBAI

GEMTECH I DIFFERENTIAL PRESSURE GAUGE IN Universal Industrial Estate MUMBAI

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH I DIFFERENTIAL PRESSURE GAUGE Form Vikram Udyogpuri Industrial Area Madhya Pradesh

GEMTECH I DIFFERENTIAL PRESSURE GAUGE Form Vikram Udyogpuri Industrial Area Madhya Pradesh

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH DIFFERENTIAL PRESSURE GAUGE IN Solaris Industrial Estate MUMBAI MAHARASHTRA

GEMTECH DIFFERENTIAL PRESSURE GAUGE BY Solaris Industrial Estate MUMBAI MAHARASHTRA

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

#GEMTECH DIFFERENTIAL PRESSURE GAUGE Form Kalol Industrial Estate Gandhinagar Gujarat

#GEMTECH DIFFERENTIAL PRESSURE GAUGE Form Kalol Industrial Estate Gandhinagar Gujarat

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH #OMEGA DIFFERENTIAL PRESSURE GAUGE NEAR DAMANGANGA INDUSTRIAL PARK VAPI GUJARAT

GEMTECH #OMEGA DIFFERENTIAL PRESSURE GAUGE NEAR DAMANGANGA INDUSTRIAL PARK VAPI GUJARAT

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

GEMTECH @ DIFFERENTIAL PRESSURE GAUGE FROM KANWAR SINGH INDUSTRIAL AREA NAZAFGARH ROAD DELHI

GEMTECH @ DIFFERENTIAL PRESSURE GAUGE FROM KANWAR SINGH INDUSTRIAL AREA NAZAFGARH ROAD DELHI

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine,resistance of Filter,Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

Ambient Temperature - -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range - MM Of Water

Model	Description
G2000-100MM	DPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	DPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	DPG,Range 0-150 MM W.C.
G2000-15MM	DPG,Range 0-15 MM W.C.
G2000-200MM	DPG,Range 0-200 MM W.C.
G2000-250MM	DPG,Range 0-250 MM W.C.
G2000-25MM	DPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	DPG,Range 0-300 MM W.C.
G2000-50MM	DPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	DPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	DPG,Range 0-80 MM W.C., Minor Divisions 2.0.

WhatsApp No.9871014210,WhatsApp No.9811065204,WhatsApp No.8376899729,WhatsApp No.8368888047,WhatsApp No.9268631221,

Yes! I am Interested

Dwyer 628-06-GH-P1-E4-S1 Pressure Transmitter 0-5 PSI

Product Details:

Minimum Order Quantity	5 Piece
Model Number/Name	628-06-GH-P1-E4-S1
Measuring Rate	0-5 psi
Steel Grade	Stainless Steel
Automation Grade	Manual
Material Grade	Stainless Steel
Condition	New
Measuring Ranges	0-5 psi
Temperatures	200
Minimum Order Quantity	12 No
Brand	DWYER USA

Dwyer 628-06-GH-P1-E4-S1 PRESSURE TRANSMITTER 0-5 PSI

Dwyer 628-06-GH-P1-E4-S1 PRESSURE TRANSMITTER 0-5 PSIG

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta

Additional Information:

Production Capacity: http://www.dpengineers.in
Delivery Time: http://www.dpengineer.in
Packaging Details: http://www.dpengineerindia.com

Yes! I am Interested

Dwyer 628-07-GH-P3-E4-S1 Pressure Transmitter 0-15 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	SERIES 626 & 628
Measuring Rate	DWYER 628-07-GH-P3-E4-S1
Automation Grade	Manual
Range	0-15 PSIG
Condition	New
Measuring Ranges	0-15 PSIG
Usage/Application	Irrigation equipment
Applications	PTO systems
Response Time	300 ms
Application	Pumping systems
Brand	Dwyer USA
Product Weight	10 oz (283 g)

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG

Dwyer 628-07-GH-P3-E4-S1 Industrial 316 SS Pressure Transmitter, 0-15 psig
MORE ABOUT THIS ITEM

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta

Additional Information:

Production Capacity: http://www.dpengineerindia.com
Delivery Time: http://www.dpengineersindia.in
Packaging Details: http://www.dpengineers.info

Yes! I am Interested

Dwyer 628-07-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-15 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	SERIES 626 & 628
Measuring Rate	DWYER 628-07-GH-P3-E4-S1
Automation Grade	Manual
Weight	10 oz (283 g)
Range	0-15 PSIG
Condition	New
Measuring Ranges	0-15 PSIG
Usage/Application	Irrigation equipment
Applications	PTO systems
Response Time	300 ms
Application	Pumping systems
Brand	Dwyer USA
Product Weight	10 oz (283 g)

Dwyer 628-07-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta

Additional Information:

Production Capacity: http://www.dpengineers.info
Delivery Time: http://www.dpengineersindia.in
Packaging Details: http://www.dpengineer.co.in

Yes! I am Interested

Dwyer 628-13-GH-P1-E7-S1 Pressure Transmitter 0-300 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	628-13-GH-P1-E7-S1
Measuring Rate	0-300 PSIG
Automation Grade	Manual
Weight	10 oz (283 g)
Range	0-300 Psig
Condition	New
Measuring Ranges	0-300 PSIG
Usage/Application	PTO systems
Applications	Pumping systems
Response Time	300 ms.
Application	Booster stations
Brand	DWYER USA
Net Weight	10 oz (283 g).
Product Weight	10 oz (283 g).

Dwyer 628-13-GH-P1-E7-S1 PRESSURE TRANSMITTER 0-300 PSIG

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineer.co.in
Delivery Time: http://www.dpengineer.in
Packaging Details: http://www.dpengineers.in

Yes! I am Interested

Dwyer 628-70-GH-P3-E4-S1 Pressure Transmitter 0- 2 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	628-70-GH-P3-E4-S1
Measuring Rate	0-2 Bar
Automation Grade	Manual
Weight	10 oz (283 g)
Range	0-2 Bar
Condition	New
Measuring Ranges	0-2 Bar
Usage/Application	Irrigation equipment
Applications	Hydraulic
Response Time	300 ms.
Application	Compressors
Brand	DWYER USA
Net Weight	10 oz (283 g).
Series	626 & 628

Dwyer 628-70-GH-P3-E4-S1 PRESSURE TRANSMITTER 0- 2 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineers.co.in
Delivery Time: http://www.dpengineersindia.com
Packaging Details: http://www.dpengineersindia.in

Yes! I am Interested

Dwyer 628-75-GH-P3-E1-S1 Pressure Transmitter 0-10 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	DWYER 628-75-GH-P3-E1-S1
Measuring Rate	0-10 Bar
Automation Grade	Manual
Weight	10 oz (283 g)
Range	0-10 Bar
Condition	New
Measuring Ranges	0-10 Bar
Usage/Application	Irrigation equipment
Applications	Hydraulic
Response Time	300 ms.
Application	Irrigation System Pressure
Brand	DWYER USA
Net Weight	10 oz (283 g).
Series	626 & 628

Dwyer 628-75-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-10 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineersindia.in
Delivery Time: http://www.dpengineers.info
Packaging Details: http://www.dp-engineers.com

Yes! I am Interested

Dwyer 628-90-GH-P3-E4-S1 Pressure Transmitter 0-16 Bar

Product Details:

Minimum Order Quantity	10 Piece
Brand	DWYER USA
Application	Booster stations
Product Weight	10 oz (283 g)
Response Time	300 ms.
Usage/Application	PTO systems
Model Number/Name	Dwyer 628-90-GH-P3-E4-S1
Automation Grade	Manual
Measuring Ranges	0-16 BAR
Condition	New
Measuring Rate	0-16 BAR
Net Weight	10 oz (283 g).
Applications	Pumping systems

Dwyer 628-90-GH-P3-E4-S1 Pressure Transmitter 0-16 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineers.in
Delivery Time: http://www.dpengineer.in
Packaging Details: http://www.dpengineers.co.in

Yes! I am Interested

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	628-07-GH-P3-E1-S1
Material	316L stainless steel
Measuring Rate	0-15 PSIG
Automation Grade	Manual
Condition	New
Measuring Ranges	0-15 PSIG
Usage/Application	Booster stations
Response Time	300 ms.
Application	PTO systems
Brand	Dwyer USA
Warranty	yes
Product Weight	10 oz (283 g)

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta

Additional Information:

Production Capacity: http://www.dpengineersdelhi.co.in
Delivery Time: http://www.dpengineers.co.in
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	628-07-GH-P3-E1-S1
Material	316L stainless steel
Measuring Rate	0-15 PSIG
Automation Grade	Manual
Condition	New
Measuring Ranges	0-15 PSIG
Usage/Application	Booster stations
Response Time	300 ms.
Application	PTO systems
Brand	Dwyer USA
Warranty	yes
Product Weight	10 oz (283 g)

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG
MORE ABOUT THIS ITEM

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for deta

Additional Information:

Production Capacity: http://www.dpengineersdelhi.co.in
Delivery Time: http://www.dpengineers.co.in
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-75-GH-P3-E4-S1 Pressure Transmitter 0-10 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	DWYER 628-75-GH-P3-E4-S1
Measuring Rate	0-10 BAR
Automation Grade	Manual
Accuracy	1.0% FS
Condition	New
Measuring Ranges	0-10 BAR
Usage/Application	Submersible pump control
Applications	Irrigation equipment
Response Time	300 ms
Application	Pumping systems
Brand	DWYER USA
Net Weight	10 oz (283 g)

Dwyer 628-75-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-10 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dp-engineers.com
Delivery Time: http://www.dpengineerindia.in
Packaging Details: http://www.dpengineers.co.in

Yes! I am Interested

Dwyer 628-81-GH-P3-E1-S1 Pressure Transmitter 0-40 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	Dwyer 628-81-GH-P3-E1-S1
Measuring Rate	0-40 Bar
Automation Grade	Manual
Accuracy	1.0% FS
Condition	New
Measuring Ranges	0-40 Bar
Usage/Application	Submersible pump control
Applications	Irrigation equipment
Response Time	300 ms
Application	Pumping systems
Brand	DWYER USA
Net Weight	10 oz (283 g)

Dwyer 628-81-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-40 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineers.co.in
Delivery Time: http://www.dpengineersdelhi.co.in
Packaging Details: http://www.dp-engineers.com

Yes! I am Interested

Dwyer 628-81-GH-P3-E4-S1 Pressure Transmitter 0-40 PSIG

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	DWYER 628-81-GH-P3-E4-S1
Measuring Rate	0-40 PSIG
Automation Grade	Manual
Condition	New
Usage/Application	Irrigation equipment
Response Time	300 ms
Application	Submersible pump control
Brand	DWYER USA
Warranty	Yes
Product Weight	10 oz (283 g)

Dwyer 628-81-GH-P3-E4-S1 Pressure Transmitter 0-40 PSIG

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details

Additional Information:

Production Capacity: http://www.dpengineers.co.in
Delivery Time: http://www.dpengineersdelhi.co.in
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-82-GH-P3-E4-S1 Pressure Transmitter 0-70 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	DWYER 628-82-GH-P3-E4-S1
Measuring Rate	0-70 BAR
Steel Grade	316L SS.
Automation Grade	Manual
Material Grade	Type 316L SS.
Range	0-70 BAR
Condition	New
Usage/Application	Irrigation equipment
Response Time	300 ms.
Application	Industrial process monitoring
Brand	DWYER USA
Product Weight	10 oz (283 g).

Dwyer 628-82-GH-P3-E4-S1 Pressure Transmitter 0-70 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dp-engineers.com
Delivery Time: http://www.dpengineer.info
Packaging Details: http://www.dpengineers.info

Yes! I am Interested

Dwyer 628-87-GH-P3-E1-S1 Pressure Transmitter 0-500 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 628-87-GH-P3-E1-S1
Material	Type 316L SS.
Measuring Rate	0-500 BAR
Steel Grade	Type 316L SS.
Automation Grade	Manual
Material Grade	Type 316L SS
Packing Size	1
Condition	New
Measuring Ranges	0-500 BAR
Process Connection	1/4 Inch male or female NPT and BSPT.
Usage/Application	Industrial process monitoring
Applications	Compressors
Range Of Product	0-500 BAR
Response Time	300 ms.
Service	Compatible gases and liquids
Mounting Orientation	Mount in any position
Application	Industrial process monitoring
Brand	DWYER USA
Net Weight	10 oz (283 g).
Product Weight	10 oz (283 g).

Dwyer 628-87-GH-P3-E1-S1 Pressure Transmitter 0-500 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineer.info
Delivery Time: http://www.dp-engineers.com
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-91-GH-P3-E4-S1 Pressure Transmitter 0-6 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 628-91-GH-P3-E4-S1
Material	Type 316L SS.
Measuring Rate	0-6 BAR
Automation Grade	Manual
Material Grade	Type 316L SS.
Weight	10 oz (283 g).
Range	0-6 BAR
Condition	New
Usage/Application	Compatible gases and liquids
Applications	Industrial process monitoring
Service	Gases and Liquids.
Application	Compressors
Brand	DWYER USA
Product Weight	10 oz (283 g).

Dwyer 628-91-GH-P3-E4-S1 Pressure Transmitter 0-6 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.
Product Applications
CompressorsPumping SystemsIrrigation System PressureIndustrial Process Monitoring Hydraulic
MORE ABOUT THIS ITEM
Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineers.info
Delivery Time: http://www.dpengineersindia.in
Packaging Details: http://www.dpengineerindia.com

Yes! I am Interested

Dwyer 628-95-GH-P1-E1-S1 Pressure Transmitter 0-600 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 628-95-GH-P1-E4-S1
Material	Type 316L SS.
Measuring Rate	0-600 BAR
Packaging Type	1
Automation Grade	Manual
Material Grade	Type 316L SS
Packing Size	1
Weight	10 oz (283 g).
Range	0-600 BAR
Condition	New
Measuring Ranges	0-600 BAR
Usage/Application	Compatible gases and liquids
Applications	Compressors
Connection Available	1/4 Inch male or female NPT and BSPT.
Range Of Product	0-600 BAR
Service	Gases and Liquids.
Application	Industrial process monitoring
Brand	DWYER USA
Net Weight	10 oz (283 g).
Product Weight	10 oz (283 g).

Dwyer 628-95-GH-P1-E1-S1 Pressure Transmitter 0-600 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Yes! I am Interested

Dwyer 628-95-GH-P1-E4-S1 Pressure Transmitter 0-600 Bar

Product Details:

Minimum Order Quantity	5 Number
Automation Grade	Manual
Measuring Ranges	0-600 BAR
Measuring Rate	0-600 BAR
Packaging Size	1
Steel Grade	Type 316L SS
Material Grade	Type 316L SS
Connection Available	1/4 Inch male or female NPT and BSPT
Range Of Product	0-600 BAR
Brand	DWYER USA
Application	Industrial process monitoring
Product Weight	10 oz (283 g).
Usage/Application	Compatible gases and liquids
Net Weight	10 oz (283 g).
Applications	Compressors
Weight	10 oz (283 g).
Condition	New
Range	0-600 BAR
Material	Type 316L SS.
Model Number/Name	DWYER 628-95-GH-P1-E4-S1
Service	Gases and Liquids.

Dwyer 628-95-GH-P1-E4-S1 Pressure Transmitter 0-600 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details

Additional Information:

Production Capacity: http://www.dpengineersdelhi.co.in
Delivery Time: http://www.dpengineers.co.in
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-76-GH-P1-E4-S5 Pressure Transmitter 0-12 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 628-76-GH-P1-E4-S5
Material	Type 316L SS.
Measuring Rate	0-12 BAR
Automation Grade	Manual
Material Grade	Type 316L SS
Packing Size	1
Weight	10 oz (283 g).
Condition	New
Measuring Ranges	0-12 BAR
Usage/Application	Industrial process monitoring
Applications	Compatible gases and liquids
Response Time	300 ms.
Service	Gases and Liquids.
Application	Compressors
Brand	DWYER USA
Net Weight	10 oz (283 g).

Dwyer 628-76-GH-P1-E4-S5 Pressure Transmitter 0-12 Bar

Series 626 & 628 Industrial Pressure Transmitter

Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineer.info
Delivery Time: http://www.dpengineersindia.in
Packaging Details: http://www.dpengineerindia.com

Yes! I am Interested

Dwyer 174777-00 Pressure Transmitter 0-21 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 174777-00
Material	Type 316L SS.
Measuring Rate	0-21 Bar
Packaging Size	1
Automation Grade	Manual
Material Grade	Type 316L SS.
Weight	10 oz (283 g).
Mounting Type	Type 316L SS.
Condition	New
Measuring Ranges	0-21 Bar
Process Connection	1/4 Inch male or female NPT and BSPT.
Usage/Application	Compatible gases and liquids
Response Time	300 ms.
Application	Compatible gases and liquids
Brand	DWYER USA
Packing Type	1
Product Weight	10 oz (283 g).

Dwyer 174777-00 Pressure Transmitter 0-21 Bar
Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs
The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.
The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications
CompressorsPumping SystemsIrrigation System PressureIndustrial Process MonitoringHydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.
A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineerindia.com
Delivery Time: http://www.dpengineer.co.in
Packaging Details: http://www.dpengineer.in

Yes! I am Interested

Dwyer 174779-00 Pressure Transmitter 0-400 Bar

Product Details:

Minimum Order Quantity	10 Number
Model Number/Name	DWYER 174779-00
Measuring Rate	0-400 BAR
Packaging Size	1
Steel Grade	Type 316L SS.
Automation Grade	Manual
Material Grade	Type 316L SS.
Weight	10 oz (283 g).
Range	0-400 BAR
Condition	New
Measuring Ranges	0-400 BAR
Usage/Application	Industrial process monitoring
Range Of Product	0-400 BAR
Response Time	300 ms.
Application	Compatible gases and liquids
Brand	DWYER USA
Net Weight	10 oz (283 g).

Dwyer 174779-00 Pressure Transmitter 0-400 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineer.co.in
Delivery Time: http://www.dpengineers.info
Packaging Details: http://www.dpengineer.info

Yes! I am Interested

Dwyer 628-83-GH-P3-E4-S1 Pressure Transmitter 0-100 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	DWYER 628-83-GH-P3-E4-S1
Material	Type 316L SS.
Automation Grade	Manual
Material Grade	Type 316L SS.
Range	0-100 BAR
Condition	New
Usage/Application	Industrial process monitoring
Applications	Irrigation equipment
Response Time	300 ms.
Service	Gases and Liquids
Brand	DWYER USA
Net Weight	10 oz (283 g).

Dwyer 628-83-GH-P3-E4-S1 Pressure Transmitter 0-100 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineer.info
Delivery Time: http://www.dp-engineers.com
Packaging Details: http://www.dpengineerindia.in

Yes! I am Interested

Dwyer 628-85-GH-P3-E1-S1 Pressure Transmitter 0-200 Bar

Product Details:

Minimum Order Quantity	5 Number
Model Number/Name	WYER 628-85-GH-P3-E1-S1
Material	Type 316L SS.
Packaging Size	1
Steel Grade	316L SS.
Automation Grade	Manual
Material Grade	316L SS.
Range	0-200 BAR
Condition	New
Measuring Ranges	0-200 BAR
Modle	DWYER 628-85-GH-P3-E1-S1
Usage/Application	Pumping systems
Applications	Irrigation equipment
Response Time	300 ms.
Service	Compatible gases and liquids.
Application	Irrigation equipment
Brand	DWYER USA
Net Weight	10 oz (283 g).
Product Weight	10 oz (283 g).

Dwyer 628-85-GH-P3-E1-S1 Pressure Transmitter 0-200 Bar

Series 626 & 628 Industrial Pressure Transmitter
Complete Offering of Ranges, Connections and Outputs

The SERIES 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing.

The SERIES 628 Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Note: The standard conduit housing (-CH) has been phased out, see the conduit box housing (-CB) for the replacement model.

Product Applications

Compressors
Pumping Systems
Irrigation System Pressure
Industrial Process Monitoring
Hydraulic

MORE ABOUT THIS ITEM

Ideal for OEM and process applications where ±1% full-scale accuracy is required. Transmitters feature a stainless steel housing and 316 stainless steel oil-filled sensor. The corrosion-resistant 316L stainless steel wetted parts allow these transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals in compressors, irrigation equipment, and process monitoring.

A variety of optional outputs, process connections and electrical terminations are available; contact an Application Specialist for details.

Additional Information:

Production Capacity: http://www.dpengineerindia.in
Delivery Time: http://www.dpengineers.co.in
Packaging Details: http://www.dpengineersdelhi.co.in

Yes! I am Interested

Series 251 - Wet/Wet Differential Pressure Transmitter

Product Details:

Brand

Sensocon USA Series 251

Series 251 - Wet/Wet Differential Pressure Transmitter
• 0.25% Accuracy

• 316 Stainless Steel construction

• 1000 PSI working pressure

• 5:1 Turn down

• Certificate of Calibration

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Model Number Range
251-01 0 - 5 PSI ( 34.5 kPa )
251-02 0 - 10 PSI ( 68.9 kPa )
251-03 0 - 15 PSI ( 103 kPa )
251-04 0 - 30 PSI ( 206.8 kPa )
251-05 0 - 50 PSI ( 344.7 kPa )
251-06 0 - 100 PSI ( 689.5 kPa )
251-07 0 - 150 PSI ( 1034 kPa )
251-08 0 - 300 PSI ( 2068 kPa )
*Other ranges available upon request.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Yes! I am Interested

Sensocon USA Wet Differential Pressure Transmitter Series 251

Product Details:

Brand

Sensocon USA Series 251

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-01

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-01 0 - 5 PSI ( 34.5 kPa )

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Yes! I am Interested

Wet/Wet Differential Pressure Transmitter Series 251-02

Product Details:

Brand

Sensocon USA Series 251

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-02

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-02 0 - 10 PSI ( 68.9 kPa )

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Yes! I am Interested

Wet Differential Pressure Transmitter Series 251-03

Product Details:

Brand

Sensocon

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-03
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-03 0 - 15 PSI ( 103 kPa )

Yes! I am Interested

Wet Differential Pressure Transmitter Series 251-04

Product Details:

Brand

Sensocon

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-04

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-04 0 - 30 PSI ( 206.8 kPa )

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Yes! I am Interested

Wet Differential Pressure Transmitter Series 251-06

Product Details:

Brand

Sensocon

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-06

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive - 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4" NPT female, optional 1/4" G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-06 0 - 100 PSI ( 689.5 kPa )

Yes! I am Interested

Products

Popular Cities GEMTECH Differential Pressure Gauge Wholesalers in Delhi,NCR, India|Faridabad-Noida-IMT HARYANA-IMT Rothak-Rookee-Haridwar-Himchal Pardesh- D.P.ENGINEERS

GEMTECH I DIFFERENTIAL PRESSURE GAUGE FOR SACHIN Industrial Estate SURAT Gujarat

GEMTECH / Differential Pressure Gauge Near Dalia Industrial Area Mumbai Maharashtra India

GEMTECH I DIFFERENTIAL PRESSURE GAUGE IN Universal Industrial Estate MUMBAI

GEMTECH I DIFFERENTIAL PRESSURE GAUGE Form Vikram Udyogpuri Industrial Area Madhya Pradesh

GEMTECH DIFFERENTIAL PRESSURE GAUGE IN Solaris Industrial Estate MUMBAI MAHARASHTRA

#GEMTECH DIFFERENTIAL PRESSURE GAUGE Form Kalol Industrial Estate Gandhinagar Gujarat

GEMTECH #OMEGA DIFFERENTIAL PRESSURE GAUGE NEAR DAMANGANGA INDUSTRIAL PARK VAPI GUJARAT

GEMTECH @ DIFFERENTIAL PRESSURE GAUGE FROM KANWAR SINGH INDUSTRIAL AREA NAZAFGARH ROAD DELHI

Dwyer 628-06-GH-P1-E4-S1 Pressure Transmitter 0-5 PSI

Dwyer 628-07-GH-P3-E4-S1 Pressure Transmitter 0-15 PSIG

Dwyer 628-07-GH-P3-E1-S1 PRESSURE TRANSMITTER 0-15 PSIG

Dwyer 628-13-GH-P1-E7-S1 Pressure Transmitter 0-300 PSIG

Dwyer 628-70-GH-P3-E4-S1 Pressure Transmitter 0- 2 Bar

Dwyer 628-75-GH-P3-E1-S1 Pressure Transmitter 0-10 Bar

Dwyer 628-90-GH-P3-E4-S1 Pressure Transmitter 0-16 Bar

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG

Dwyer 628-07-GH-P3-E4-S1 PRESSURE TRANSMITTER 0-15 PSIG

Dwyer 628-75-GH-P3-E4-S1 Pressure Transmitter 0-10 Bar

Dwyer 628-81-GH-P3-E1-S1 Pressure Transmitter 0-40 Bar

Dwyer 628-81-GH-P3-E4-S1 Pressure Transmitter 0-40 PSIG

Dwyer 628-82-GH-P3-E4-S1 Pressure Transmitter 0-70 Bar

Dwyer 628-87-GH-P3-E1-S1 Pressure Transmitter 0-500 Bar

Dwyer 628-91-GH-P3-E4-S1 Pressure Transmitter 0-6 Bar

Dwyer 628-95-GH-P1-E1-S1 Pressure Transmitter 0-600 Bar

Dwyer 628-95-GH-P1-E4-S1 Pressure Transmitter 0-600 Bar

Dwyer 628-76-GH-P1-E4-S5 Pressure Transmitter 0-12 Bar

Dwyer 174777-00 Pressure Transmitter 0-21 Bar

Dwyer 174779-00 Pressure Transmitter 0-400 Bar

Dwyer 628-83-GH-P3-E4-S1 Pressure Transmitter 0-100 Bar

Dwyer 628-85-GH-P3-E1-S1 Pressure Transmitter 0-200 Bar

Series 251 - Wet/Wet Differential Pressure Transmitter

Sensocon USA Wet Differential Pressure Transmitter Series 251

Wet/Wet Differential Pressure Transmitter Series 251-02

Wet Differential Pressure Transmitter Series 251-03

Wet Differential Pressure Transmitter Series 251-04

Wet Differential Pressure Transmitter Series 251-06

About us

Social Media

Useful links

Contact Us